Advance Turbo Flasher (ATF Box) Features
you can flash Nokia windows mobile, Nokia android by ATF box very easily
- Flash
- Supports new loaders for SL3 phones:
- New RAPUYAMA loaders with new protocol (2010 loaders)
- Dead USB flashing (for new loader models also)
- Super fast Nokia flashing
- Nokia E52 full flash via Fbus (49 sec)
- Nokia X3 full flash (29 sec)
- Nokia 6500c full flash via Fbus (28 sec)
- Nokia 6700c (48 sec)/Nokia 6120c (52 sec) full flash
- Supports new loaders for SL3 phones:
- Repair
- SL1, SL2, SL3 Super dongle key repair
- SL1, SL2 SIMlock data repair
- Unlock
- SL1, SL2 SIM lock remove via codes
- New Rapido SL3 SIMlock remove. The following versions are supported:
- 5800d (RM-356) - v31.0.008 - v30.0.011 - v31.0.101
- 6790s - 1c (RM-492)
- 6790s - 1b(RM-599)
- E63 (RM-437) - v400.21.013
- E71 (RM-346) - v400.21.013
- N96 (RM-247) - v30.033 - v30.101
- Simlock RPL unlock/relock
Advance Turbo Flasher (ATF Box) Software Features
- High speed turbo flash
- New protocol devices X3, X6, E52, E55, 6700 etc. and all Rapuyama Fbus flash
- Tuning and Maintenance
- Life Timer Tuning (reset/write life time)
- Factory Reset
- Warranty Edit
- Production Data Edit
- Read/write camera configuration
- IMEI and locks
- Safe unlock by means of code calculation (Supports SL1 SL2 and some SL3 models)
- Unlock / Relock using RPL method
- Super Dongle key repair
- PM (Permanent Memory)
- Read/write permanent memory using SX4 Server
- Phone Test (self-test)
Advance Turbo Flasher (ATF Box) Hardware Features
- 480 mbps USB 2.0 Connection
- 100% FPGA based implementation of the Flash BUS protocols
- Adjustable VCCIO Logic Levels (3.30v, 2.80v and 1.80v)
- Compatible with old phone model Logic Level (3.30v)
- Compatible with new phone model Logic Level (2.80v)
- Compatible with future phone model Logic Level (1.80v)
- Proper ESD protection on the FLASHBUS port
- Protects phone damage due to Electro Static Discharge
- Ultra Fast Flash Clock currently up to 15 MHz
- Firmware updatable to support up to 60 MHz without hardware modifications
- Internal VPP Flash Voltage Generator (3.0v, 5.0v, 9.0v and 12.0v)
- Makes faster Flash Erasing on slow phones
- Does not require external power adapters to generate 9.0v and 12.0v
- Uses a Fast Switching SEPIC design
- Hardware upgradable through internal expansion slots
- MicroSD Card slot for future developments
- Dual RJ-4x Ports (RJ-45 and RJ-48) for external communication
- The RJ45 port is the main "Turbo" Bus
- The RJ48 port is the Secondary Bus that can support parallel or serial protocols such as 2Mbps UART, JTAG and Flashing Protocols
- 5 Multicolored LED Indicators:
- Rectangular Orange: FBUS_RX
- Rectangular Green: FBUS_TX
- Circular Blue: USB_POWER / ACP-X_POWER
- Circular Green: VBATT
- Circular Orange: VPP
No comments:
Post a Comment